Crane KRK-320 is designed to lift to the floors and the roof under construction or repair of buildings of various construction materials in the assembly after the period or during the roofing work.
The advantage of this crane is that flat packed it can be hand delivered and installed in any
location being constructed or repaired the roof of the building.
One of the most difficult
parts of crane KRK-320 - a winch, her weight is 80 kg.
Overall dimensions of the
crane allows you to mount it, not only in open spaces, but also in the
room.
Send request
Technical parameters
General specifications crane KRK-320
Payload, kg
320
Lift speed, m /
s
0,33
Lift height, m
50
Origin console, mm
1446
Dimensions of the elevator (length, width, height), mm
550 х 140 х 210
Weight crane without
a counter. cargo, kg
300
Mass counter. cargo,
kg
80
Wire
Rope-type 4,8-D-BK-H-R
1700 / 180 / GOST
Engine
hoist crane KRK-320
Model
4АМ901ASU1 исп.1M 1081
Power, kW
2,2
Speed, rpm
1420
Reducer
2Ч-80
Brake
TKG-160
Gear
ratio - Brake HGB-160
31,5
Base crane KRK-320
mm
1400
Crane KRK-320 consists of
a frame, representing the front and rear racks, which with the help of
clamps and bolts fastened beam. On the trolley girder
crane with pendant set, which has the ability to navigate through the
beam. Trolley is designed to
transport the tub with the load on the beam, lifting goods from the zone
of acceptance to the site. To the rear rack mounted
crane winch. The rear rack is loaded
counterweight. Winch brakes TGK-160. With the help of
electrodes connected to the winch-pillar crane KRK-320.