The lift the mast building is intended for lifting, giving in apertures
of buildings and lowering on overlapping of various building cargoes at
housing and civil building, at painting and decorating and repair of
buildings.
The minimum dimension of apertures in which giving of
materials at lift use is possible:
1000 - 1300 mm at cargo giving in the
container;
700 - 800 mm at cargo giving on a platform.
Construction elevators differs reinforced sections
that make up the mast, a more powerful winch, more electric capacity.
Send request
Technical parameters
PMS-320
PMS-500A
PMS-500
General specifications lift mast
construction PMS
Load-carrying capacity no
more, kg
320
500
500
Height of lifting no more, m
49
49
75
Moving of
cargo across concerning a mast axis, m
2
2
2,5
Speeds of lifting of
loads, m / mines
21
18
30
Weights, kg of
1900
1900
6000
Overall
dimensions lift mast
construction PMS, mm:
- lift height, no more
51025
51025
78500
- width (a basic
frame), no more
1000
850
1400
- length (a basic frame)
1300
1500
2500
- size выкатной platforms, m of section of
3,2 * 0,5
3,2 * 0,5
4 * 0,6
- sizes,
mm
430 * 320 * 2000
430 * 320 * 2000
860 * 740 * 3000
Construction and working
the lift mast construction PMS
The lift mast
construction PMS installed on flat ground, just outside the wall being
constructed or repaired buildings. Method of assembly of the
mast building hoist is quite simple: by building on top of additional
sections. Once assembled, the mast
is attached to the wall with mural towers.
On the mast lift the
traffic moves (up - down) load carriage to deliver the goods to the
required height of the floor. Cargo carriage is
equipped with a special platform that can run in to any wall openings in
buildings for loading and unloading of building materials.
The lift mast can be used
not only as a means of mechanization of construction, but also as a
storage tool. In this case, instead of
borosilicate platform lift is installed on a stationary platform, much
larger area. Cargo rises to the
necessary height, but the unloading is performed manually. These lifts are
manufactured to the customer the required height.
Possible options for
making masts with a fixed stop at the bottom of the platform at the top
and middle of the mast.
Variants of execution
lifts construction sites may be different: reinforced equipped with
guards.