Products
Our Production
Road and building equipment
|
Plastering machines
Mini plaster unit MASH-1-01
Mini plaster unit MASH-1-01 is designed for cooking of the finished dry mortar mixture
masonry, plaster or facing mortar mixture, its transportation on sleeves
and drawing on the prepared surface at the facilities, electricity and
water supply, except for use in hazardous areas and PUE.
Mini plaster unit MASH-1-01 can be
easily disassembled into parts, which ensures its portability. Plaster aggregate of
continuous operation. The bags of dry mortars
mounted on tank plaster aggregate. Possible supply of
finished dry mortar mixture of a bunker-silo to silo plaster machine
with loader. Plaster units can be used
as mortar for the transportation of the closed mortars. Plaster unit is equipped
with an air compressor, mud channel with a nozzle and air hose. The nozzle assembly may
cause the plaster mortar mix without air mechanical and pneumatic
spraying. When applied to the
prepared surface of the mortar mix to a pneumatically spray nozzle
assembly must be the plaster cast compressed air from the compressor. The unit injector
provides, subject to technology, high quality machined surfaces and
small losses mortar mixture. Water in the plastering
machine is powered by the water network directly into the mixer (up to 6
liters per minute, which allows shut the dry mixture with a water flow
rate up to 0.4 liters per 1 kg of dry mixture), provided the dosage auto
components of the solution with water.
Mini plaster unit MASH-1-01 is equipped with water pump, which allows you to work with the
abstraction of water from the tank, with an uncertain water supply
facilities.
|
Send request
|
Technical parameters
General specifications mini-plaster unit
|
Productivity, m3 / h |
1,2
|
Operating pressure, MPa |
1,5 |
Capacity hopper, not less, l
|
45 |
Maximum range of filing mini-plaster aggregate, m: |
- horizontal |
30 |
- vertical |
20 |
Engine power mini-plaster units, kW: |
- compressor |
1,1 |
- pump |
4 |
- dosing of dry mix |
0,75 |
Voltage, V
|
380 |
Compressor, m3 / h |
8,6 |
Maximum operating air pressure, MPa
|
0,3 |
Hose mud channel |
32 mm х 10 m |
Air hose |
9 mm х 10 m |
Loading height, mm
|
1100
|
Dimensions, mm
|
1730 x 630 x 1230
|
Mass, kg
|
160
|
Analog in our production
Multi-purpose plastering machine USHM-150
Universal plastering machine USHM-150 is designed for cooking, transportation and deposition (nozzle tures) mortar mixes.
Plastering machine used in the construction of buildings and structures.
|
|
|
|