Products
Our Production
Road and building equipment
|
Plastering machines
Plastering machine SHM-30
Plaster machine SHM-30 designed
for making mortar dry mixes (based on gypsum, lime, cement),
transportation and deposition.
Plastering machine is used
for plastering and plastering work, as well as for the device
self-leveling floors.
Advantages plastering machine
SHM-30:
- Maximum convenience. Dimensions - maximum width plastering
machine - 65 cm a tangible asset for plasterers is a low loading height
945 mm. With a smaller size and low loading capacity hopper (100 l)
exceeds the capacity of bunkers European counterparts. These dimensions
make our plastering machine more comfortable during transportation and
movement of construction site: a roomy tank reduces the number of
approaches for loading the dry mixture, and the height of hopper
plastering machine requires less effort when lifting the bag.
- Technical reliability. Geared motors, compressor, water
pump and the main elements of water, air and electrical fittings are
supplied well-known European manufacturers.
- To apply the dry mixture from the hopper into the mixing
tower uses proven as the most trouble-free with the principle of the
spiral auger. Maximum simplified control scheme eliminates the
possibility of breakage plastering machine, as well as doing repairs
and maintenance of these units affordable, simple and cheap.
- Competitive price. Our plastering machine is much cheaper
than imported counterparts present at the Russia market. Years of
experience in producing construction equipment possible to achieve the
minimization of costs and reducing production costs.
- Construction plastering machine allows for a few minutes
break it into 3 modules (each weighing 30-70 kg): mixing tower with a
motor-reducer and героторным pump, a hopper to the delivery mechanism
of dry mix and a frame with installed units and control systems.
Convenient tongs, size and weight allow two workers to easily move each
of the modules, especially on stairs. If necessary, each of the modules
plastering machine as easily divided into 2-3 additional item.
- Gerotor pump. Our plastering machine is designed to
work with any standard героторными pump type D6-3, which are fastened
by means of wedge-shaped retainers that can replace them for a few
minutes.
- Electrical, water and air valves are the most simple and
extremely accessible, which greatly simplifies the repair and
maintenance.
- The rear wall of the hopper with a motor-reducer filing is
made in the quick version, which would, in the case of water ingress
into the zone of dry mix in a few minutes to clean up the bunker and
then start plastering machine.
|
Send request
|
Technical parameters
Features plastering machine SHM-30
|
Pump type |
gerotor |
Pump model |
D 6-3
|
Mark |
KACHELE |
Capacity, l / min |
for plastering - 22 - 30
in pouring floors - 45
|
Pressure on the mixture, bar
|
25 |
Feeding height, m |
up to 30
|
Range of feed, m
|
up to 50 |
Diameter of the plug mud channel, mm
|
25 |
Volume of hopper, l |
100 |
Drive plastering machine |
Drive type |
electromechanical |
Mark |
INNOVARU
|
Drive power mixer, KW
|
5,5 |
Drive power supply to the dry mixture, KW |
0,75 |
Compressor plastering machine
|
Compressor Type |
piston / diaphragm |
Mark
|
ABN
|
Compressor, l / min |
220 |
Water pump plastering machine
|
Pump mark
|
PEDROLLO
|
Performance at a pressure of 6 bar, l / min |
up to 65
|
Dimensions plastering machine |
Height of loading the hopper, mm
|
945 |
Length * Width * Height, m
|
1,3 * 0,65 * 1,5 |
Weight, kg |
240 |
|
|