We present an extensive range of pneumatic punch for different purposes.
The
main technological appointment air punch - the formation of compacted
soils in the wells with a diameter of 55 mm, 65 mm, 80 mm, 145 mm, 190
mm and lengths up to 40 m with a chain of follow-up pads in their
communications, miscellaneous (cable and pipe).
Pneumatic
punches successfully applied in borehole drilling under the streets,
tram and railway lines, highways, runways of airports, the
reconstruction of underground utilities, etc.
In addition to the construction of communications air punches can be used in the following technological processes:
Deep seal bulk and ground subsidence;
Production of piles and ground anchors;
Production of pits for installation of poles, towers, racks;
Clogging of the soil and extracting of steel sheet piles or long products (I-beams, channels, corners, etc.);
Clogging of the soil of the tubular supports of bridges, overpasses, etc. marine
Send request
Technical parameters
Pneumatic
punches - it is self-propelled machine reverse impact, ability to
operate from a stationary as well as from stand-alone power source
(mobile compressor).
Especially
effective is the use of pneumatic punch with the work in cramped urban
conditions: with the passage of wells under the streets, tramway, the
reconstruction of underground utilities.
Pneumatic
punches successfully applied in the performance of wells under the
highways, highways, tunnels and between the drifts, as well as piercing
deaf wells for various purposes.
Well
diameter equals the diameter of the shell air punch and can be
increased using expanders, which are equipped with air punches. To
return air punch to the launch site at a meeting with an insurmountable
obstacle or penetration of the Deaf wells are equipped with the
mechanism of the reverse (changing the direction of motion).
If
necessary to protect the communications pipe, casing, it laid in the
hole, punched air punch, punch, or clog the air directly into the
ground the entire length of the transition being built without
education well.
Each punch comes with a set of spare parts (shock absorber, cuffs, working spring ring).
On a separate request from the consumer air punches together with the starting and aiming devices.