Products
Our Production
Road and building equipment
|
Plastering machine SHM-30
Plaster machine SHM-30 designed for making mortar dry mixes (based on gypsum, lime, cement), transportation and deposition.
Plastering machine is used for plastering and plastering work, as well as for the device self-leveling floors.
Advantages plastering machine SHM-30:
-
Maximum convenience. Dimensions - maximum width plastering machine - 65 cm a tangible asset for plasterers is a low loading height 945 mm. With a smaller size and low loading capacity hopper (100 l) exceeds the capacity of bunkers European counterparts. These dimensions make our plastering machine more comfortable during transportation and movement of construction site: a roomy tank reduces the number of approaches for loading the dry mixture, and the height of hopper plastering machine requires less effort when lifting the bag.
-
Technical reliability. Geared motors, compressor, water pump and the main elements of water, air and electrical fittings are supplied well-known European manufacturers.
-
To apply the dry mixture from the hopper into the mixing tower uses proven as the most trouble-free with the principle of the spiral auger. Maximum simplified control scheme eliminates the possibility of breakage plastering machine, as well as doing repairs and maintenance of these units affordable, simple and cheap.
-
Competitive price. Our plastering machine is much cheaper than imported counterparts present at the Russia market. Years of experience in producing construction equipment possible to achieve the minimization of costs and reducing production costs.
-
Construction plastering machine allows for a few minutes break it into 3 modules (each weighing 30-70 kg): mixing tower with a motor-reducer and героторным pump, a hopper to the delivery mechanism of dry mix and a frame with installed units and control systems. Convenient tongs, size and weight allow two workers to easily move each of the modules, especially on stairs. If necessary, each of the modules plastering machine as easily divided into 2-3 additional item.
-
Gerotor pump. Our plastering machine is designed to work with any standard героторными pump type D6-3, which are fastened by means of wedge-shaped retainers that can replace them for a few minutes.
-
Electrical, water and air valves are the most simple and extremely accessible, which greatly simplifies the repair and maintenance.
-
The rear wall of the hopper with a motor-reducer filing is made in the quick version, which would, in the case of water ingress into the zone of dry mix in a few minutes to clean up the bunker and then start plastering machine.
|
Send request
|
Technical parameters
Features plastering machine SHM-30 |
Pump type |
gerotor |
Pump model |
D 6-3 |
Mark |
KACHELE |
Capacity, l / min |
for plastering - 22-30
in pouring floors - 45 |
Pressure on the mixture, bar
|
25 |
Feeding height, m |
up to 30 |
Range of feed, m
|
up to 50 |
Diameter of the plug mud channel, mm
|
25 |
Volume of hopper, l |
100 |
Drive plastering machine |
Drive type |
electromechanical |
Mark |
INNOVARU |
Drive power mixer, KW
|
5,5 |
Drive power supply to the dry mixture, KW |
0,75 |
Compressor plastering machine
|
Compressor Type |
piston / diaphragm |
Mark
|
ABN |
Compressor, l / min |
220 |
Water pump plastering machine
|
Pump mark
|
PEDROLLO |
Performance at a pressure of 6 bar, l / min |
up to 65 |
Dimensions plastering machine |
Height of loading the hopper, mm
|
945 |
Length * Width * Height, m
|
1,3 * 0,65 * 1,5 |
Weight, kg |
240 |
Disassembled form plastering machine SHM-30:
|
|