 Products
Our Production
Road and building equipment
|
Mobile screw compressor station with a diesel engine DEUTZ (Germany)
Technical parameters
Diesel screw
compressor stations are made using advanced technology and
accordance with the current requirements of environmental protection.
Diesel screw
compressor stations Remeza designed to produce compressed air
supply pneumatic tools, gears, machinery for construction,
road, exploration and other work for the mechanization of heavy and
labor-intensive processes. It is an ideal source of compressed air production
construction and road works. Stations in the standard to
operation at an ambient temperature of -15 to +45 ° C. In
special versions Operating temperature -35 to +45 ° C
Screw block of «Rotorcomp»
(Germany)
-High
reliability
-Low
operating costs
-manufacturing plant at work
pressure from 7 to 15 bar
Diesel Engine Company «DEUTZ»
(Germany)
-Longer
service intervals, then after 500 hours of operation.
-low fuel consumption.
-The lack of cooling
fluid diesel engine oil cooling is the lubrication system
engine.
-24 months warranty.
-Average yield to
overhaul of 15,000 hours.
-All points of technical
Services are on the same side of the engine.
-High
maintainability, piston group has three repair sizes.
-wide service network
worldwide after-sales service.
-list of service centers listed on the site
www.deutz.de section Partners
Case
-Powder
weatherproof paint finish provides corrosion protection.
-Easy accessibility to
all components of the station during maintenance and repair.
-Easy loading,
fuel tank is equipped with a fuel level sensor.
-Fuel Tank Capacity
provide at least eight hours of the station with a full load.
-design of the pallet
Frame eliminates the possibility of getting to the ground fluids.
-small size
housing and removable drawbar can upload up to 8 eurotrucks
compressor stations.
Chassis company «AL-KO» (Germany)
-High safety.
-Hot-dip galvanizing
provides optimum protection against corrosion.
-friendly technology
service.
-strong and durable
construction with reinforced knuckles axles.
-easily removable drawbar.
Options stations
-on supports.
-on chassis
unregulated drawbar height, loop NATO, Æ 76 mm.
-The chassis with adjustable
drawbar height, loop NATO, Æ 76 mm.
Microprocessor Control System
-mode indicator
work hours (hour meter), battery charge and permission to start.
-protection and disaster
Stop the motor with the display:
• Failure (broken belt) generator;
• A dirty air filter;
• Engine oil pressure below normal;
• high temperature engine oil engine;
• high temperature compressor oil;
• contamination of the fuel filter;
• low level of fuel in the tank.
-LCD,
LEDs.
Flexible drive sleeve
-transfer torque
torque from the diesel engine to the screw through the block
flexible drive coupling
-The advantages compared with belt drive:
• Compact, low noise connection
• no loss of energy in transmission of torque from the engine to the
Compressor
• requires no adjustment and setup
• Less impact on bearing life of the drive shaft diesel
engine block and screw
Components
-stations are supplied fully
prepared for use, you only need refueling.
-Package Includes: Battery protivootkatniki,
svettootrazhatelnye elements
-The control panel is protected from
weather conditions and mechanical damage.
A balanced head with an earring rack.
Loading - unloading carried out by fixing
hook hoist for lifting earring rack, with no additional
slinging.
-general air filter for screw compressor and diesel
engine reduces material and time costs during the MOT.
-The necessity of air
Filter reports clogging air filter
-Extra Coarse fuel filter
with water separator and water presence sensor provides quality
fuel filtration and eliminates the ingress of water into the fuel system
diesel engine.
-Compressed air outlet is provided by three
output taps
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
